BMVPD - AVREX 106 TYPE 120

  • MSDS: BMVPD
  • Manufacturer: MOBIL OIL CORP
  • Product Name: AVREX 106 TYPE 120
  • National Stock Number: 9150-00N029058
Product Identification

Product ID:AVREX 106 TYPE 120
MSDS Date:03/19/1988
FSC:9150
NIIN:00N029058
MSDS Number: BMVPD

Responsible Party
MOBIL OIL CORP
3225 GALLOWS RD
FAIRFAX, VA 22037
US

Emergency Phone: 212-883-4411;800-424-9300(CHEMTREC)

Info Phone: 703-849-3265

Preparer: ENVIRON AFFAIRS/TOX DEPT

Cage: 1E969

Contractor
MOBIL OIL CORP ENVIRONMENTAL AFFAIRS & TOXICOLOGY
PENNINGTON, NJ 08534 US

Telephone: 703-849-3265

Cage: 0AHK0

Ingredients

REFINED MINERAL OILS

Fraction By Weight: >95%


ADDITIVES AND OTHER INGREDIENTS

Fraction By Weight: <5%


INTERMITTENT DRY CREEKS. REPORT SPILL TO COAST

RTECS: 9999999ZZ


FACILITY/CAN BE DISPOS OF AT ANY GOVERNMENT

RTECS: 9999999ZZ


IS SUBJECT TO USER COMPLIANCE W/APPLIC FED, STATE &

RTECS: 9999999ZZ


CHARACTERISTICS AT TIME OF DISPOSAL.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50: (ORAL, RAT) >5 G/KG.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT EXPECTED TO BE A PROBLEM. HARMFUL
CONCENTRATIONS OF MISTS AND/OR VAPORS ARE UNLIKELY TO BE
ENCOUNTERED THROUGH ANY CUSTOMARY OR REASONABLY FORESEEABLE
HANDLING, USE, OR MISUSE OF THIS PRODUCT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MIN. SKIN: WASH CONT AREAS
W/SOAP & WATER. INGEST:NOT EXPECTED TO BE A PROB. HOWEVER, IF > 1/2
LITER (PINT) INGESTED, IMMED GIVE 1-2 GLASSES OF WATER & CALL MD,
HOSPI TAL, EMER ROOM/POIS CNTRL CNTR FOR ASSIST. DO NOT INDUCE
VOMIT/GIVE ANYTHING BY MOUTH TO AN UNCON PERS. INHAL: NOT EXPECTED
TO BE A PROB. REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O2/ARTF
RESP)

Fire Fighting

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER/FOAM MAY CAUSE FROTHING. USE WATER TO KEEP FIRE EXPOS
CNTNRS COOL. WATER SPRAY MAY BE (SUPP DATA)
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ABSORB ON FIRE RETARDANT TREATED SAWDUST,
DIATOMACEOUS EARTH, ETC. SHOVEL UP AND DISPOSE OF AT AN APPROPRIATE
WASTE DISPOSAL FACILITY I/A/W CURRENT APPLICABLE LAWS AND
REGULATIONS, AND PRODUCT CHARACT ERISTICS AT TIME OF DISPOSAL.
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE AND WITH ADEQUATE VENTILATION. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NO SPECIAL REQUIRMENTS UNDER ORDINARY CONDITIONS OF USE AND
WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NO SPECIAL EQUIPMENT REQUIRED.
Work Hygienic Practices:GOOD PERSONAL HYGIENE PRACTICES SHOULD ALWAYS
BE FOLLOWED.
Supplemental Safety and Health
FIRE FIGHT PROC:USED TO FLUSH SPILLS AWAY FROM EXPOSURE. PREVENT RUNOFF
FROM FIRE CONTROL OR DILUTION FROM ENTERING STREAMS OR DRINKING
WATER SUPPLY. SPILL PROC: REPORT SPILLS AS REQD TO APPROP AUTHOR
ITIES. U.S. COAST GUARD REGS REQ IMMED REPORTING OF SPILLS THAT
COULD REACH ANY WATERWAY INCLUDING (ING 3)

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>600F,>316C
Vapor Pres:5 @ 20C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID; MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:STRONG OXIDATION.
Hazardous Decomposition Products:CO.

Disposal

Waste Disposal Methods:PROD IS SUITABLE FOR BURNING IN AN ENCLOSED,
CONTROLLED BURNER FOR FUEL VALUE/DISP BY SUPERVISED INCINERATION.
SUCH BURNING MAY BE LIMITED PURSUANT TO THE RCRA. IN ADDITION, THE
PROD IS SUITABLE FOR P ROCESSING BY AN APPROVED RECYCLING (ING4)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.